Overland Park Water Heaters
A wall-mounted tankless water heater with its shutoff valves (illustrative photo)

Tankless Water Heater Installation in Overland Park, KS

Tired of running out of hot water? Ask about a tankless water heater in Overland Park and get a call right back. Ask for a price that spells out the gas, venting and permit.

  • Typically $1,600–$4,500 installed
  • Ask about gas, venting and permit
  • Call or text, 24/7

Water heater trouble?

Water heater trouble? Tell me what's going on, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Answered 24/7. Rather talk? Call or text (913) 794-3707.

A tankless water heater heats water only while a tap is open, so there is no tank to run dry or rust through. In exchange, it costs more up front and asks more of the gas line, the vent and the water. Call or text about one in Overland Park, tell us what you have now, and you'll get a call right back; ask for a price that shows every piece of the job.

A wall-mounted tankless water heater with its shutoff valves
A wall-hung tankless unit with isolation valves that make descaling simple.

Is tankless right for your house?

It fits some households far better than others. A tankless unit makes sense when:

  • The tank keeps running out with a full house or a big soaker tub.
  • Floor space matters, because the unit hangs on a wall.
  • The heater is old and failing anyway, so the extra cost is spread over a replacement you must buy.
  • You plan to stay put, since the payback is measured in years.

A tank still wins when the budget is tight, the gas line is small, or the house has no good wall for a flue. The tankless vs tank guide lays the two side by side.

What does a tankless install cost?

National cost guides put a tankless unit, installed, at about $1,600 to $4,500. A standard tank comes in around $1,000 to $3,400. Extras such as the permit, an electrical upgrade and removal of the old tank can add a few hundred dollars more.

$1,600–$4,500

Tankless water heater, installed (national average)

The spread is wide because a conversion changes the plumbing around the heater. Here is where the money goes.

Part of the jobWhat drives the cost
The unitFuel, flow rate and brand
Gas lineWhether the existing pipe can carry the larger burner load
VentingRoute to the outdoors and material
ElectricalA circuit, outlet or breaker space for the unit
Permit and removalAsk whether the City permit and haul-away of the old tank are included

Descaling a tankless unit typically runs $110 to $275. See the tankless cost guide for the full picture.

Weighing a tankless upgrade? Share your fuel and layout and get a price.

(913) 794-3707Talk to a plumber 24/7Text Us

What does the gas side look like here?

The City's utilities page lists two natural gas companies for Overland Park, Atmos Energy and Kansas Gas Service, and Evergy for electricity. Your bill shows which serves you. A gas tankless unit fires at a high rate for a short time, so the line feeding it and the meter behind it must keep up. That is often the biggest cost surprise in a conversion.

If the meter or the line is too small, the job grows, so ask about it early. If you smell gas at any point, leave the house, call 911 from a safe distance and then call your gas company: Kansas Gas Service at 888-482-4950 or Atmos Energy at 866-322-8667.

Does tankless need a different kind of venting?

Yes, often. A tank rises up a tall flue by natural draft, while many tankless units use a sealed vent that carries exhaust to a wall or roof through a plastic or stainless pipe. The route has to avoid windows and air intakes, and it must meet the manufacturer's rules and the City's adopted codes.

The City uses the 2024 International Plumbing Code, and its mechanical and fuel gas codes come with the same package. The installer should explain which parts apply to your wall and roof.

How does hard water affect a tankless unit?

WaterOne's 2025 report, which covers 2024, averages total hardness at 144 ppm, about 8.4 grains per gallon, and the U.S. Geological Survey (USGS) scale calls that hard. In a tankless unit, those minerals build as scale on the heat exchanger. The result is slower heating, error codes and, left alone, a shorter life.

  • Descale at least once a year through isolation valves, which should go in during the install.
  • Consider a softener if the household wants fewer scale problems; it is a separate purchase.
  • Don't skip the first flush after a new unit is hooked up.

The hard water guide has more on softeners.

Cold winters and inlet water

Overland Park has record lows of -22°F and about 17.30 inches of snow a year. Colder incoming water takes more heat to bring up to temperature, so a tankless unit sized for a summer flow rate can disappoint in January. Ask the installer to size the unit for your coldest months and your busiest hour, not an average day.

What does the City require?

The City's permit rule covers any water heater being added or replaced. A tankless unit counts, and a conversion usually adds gas, vent and electrical scopes to the permit. The City's fee schedule starts at $30 for projects valued under $5,000, with no water heater line, so ask the permit office at 913-895-6220 for the amount.

Plumbing contractors need an active Johnson County contractor license to receive a City permit. Check any company in the county's search (opens in a new tab).

What should you ask before you buy?

A few questions separate a good tankless plan from a surprise.

  • Is the gas line big enough, and has the meter been considered?
  • Where does the vent run, and what does that route add to the price?
  • Will isolation valves go in so that yearly descaling is easy?
  • How was the unit sized for your coldest month and your busiest hour?
  • Is the permit on the quote as its own line?

How getting a tankless quote works

  1. Call, text or send the form. Say what you have now, gas or electric, and where it sits.
  2. Take the call right back. Questions cover the meter, the wall and the number of bathrooms.
  3. Hear the price. Ask for the unit, gas line, venting, electrical, permit and haul-away as separate lines.
  4. Decide. Nothing is scheduled until you say yes.

Ready for endless hot water? Call or text and ask what your house needs.

(913) 794-3707Talk to a plumber 24/7Text Us

Questions homeowners ask

How much does a tankless water heater cost in Overland Park?

National averages put one at about $1,600 to $4,500 installed, against about $1,000 to $3,400 for a standard tank. Local prices vary, and the biggest swing is usually the gas line, venting or electrical work around the unit.

How many years will a tankless water heater run?

Typically 15 to 20 years, compared with 8 to 15 for a tank. Yearly descaling is what gets a unit to the long end in hard water.

Is Overland Park's water a problem for a tankless unit?

It can, because minerals coat the heat exchanger as scale. WaterOne's 2025 report (2024 data) averages about 8.4 grains per gallon, which is hard, so plan on descaling at least once a year.

Can a tankless water heater use my existing gas line?

Sometimes, but a unit that fires harder than a tank burner often needs a larger line and its own venting. Have the line checked before you commit.

Do I need a permit for a tankless water heater in Overland Park?

Yes. The City says a permit is required to add or replace a water heater, and a tankless unit counts. Ask the City for the exact fee, since its schedule starts at $30 and has no water heater line.

Will a utility rebate cover a tankless water heater?

Evergy's Kansas 2026 chart does not list water heaters, and Kansas Gas Service lists only a water-conservation kit. Ask your utility before you count on one.

Last updated:

Text Overland Park Water Heaters

Tell me what's going on with your water heater, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Rather talk? Call or text (913) 794-3707.