
Water Heater Prices in Overland Park, KS: 2026 Ranges
Curious what a water heater costs in Overland Park before you call? Check typical tank, tankless and repair prices here, then call or text for your own.
Updated Prices checked
- Tanks about $1,000–$3,400 (national)
- Your exact price comes first
- Call or text any hour
Water heater trouble?
Cost isn't only the tank on the shelf. In Overland Park the water is hard, natural gas comes from two different companies, and the City asks for a permit whenever a heater is added or replaced. Below are the ranges most homeowners meet, what a fair quote lists, and why two bids for the same house can differ. Ready now? Call or text and you'll hear your price first.
What do tank and tankless heaters cost installed?
By national averages, a standard tank runs about $1,000 to $3,400 installed. Tankless costs more because the gas line, the vent or the electrical circuit often changes along with the heater. The replacement cost guide follows a swap from permit to haul-away.
$1,000–$3,400
Standard tank water heater, installed (national average)
$1,600–$4,500
Tankless water heater, installed (national average)
$200–$850
Repair visit, national average (about $550 typical)
Gas and electric tanks land in the same bands. Tankless extras such as the permit, an electrical upgrade and removal of the old unit add a few hundred dollars more, so ask to see each one.
For one cross-check, a Kansas City, Missouri plumber's own price page lists a standard 40-gallon gas swap at $1,000 to $1,500, haul-away included. It is a single company's list price and not a market average.
What does each tank size cost?
Size moves the price more than fuel. Choose for the household, not the tank that happened to be there.
| Tank size | National average range, installed | Usually fits |
|---|---|---|
| 40-gallon | $700–$2,650 | 1–2 people |
| 50-gallon | $750–$2,800 | 2–4 people |
| 75-gallon | $1,100–$3,800 | 5 or more people |
For sizing, Rheem pairs one or two people with 30 to 40 gallons, two to four with 40 to 50, and four or five with 50 to 55. Larger households lean toward 75 gallons or tankless. The gas vs electric and sizing guide explains the label's First Hour Rating.
What do repairs cost?
Nationally, a typical repair visit runs $200 to $850, with $550 about average. The failed part sets where you land.
| Repair | National average range | Fuel |
|---|---|---|
| Pilot light or igniter | $50–$175 | gas |
| Thermocouple | $125–$250 | gas |
| Gas control valve | $250–$450 | gas |
| Thermostat | $125–$275 | electric |
| Heating element | $150–$325 | electric |
| temperature and pressure (T&P) relief valve | $35–$250 | either |
| Anode rod | $100–$250 | either |
| Dip tube | $60–$240 | either |
Age decides the rest. A thermocouple on a young tank is an easy yes, but a gas control valve on a rumbling tank of 10 or more years often tips toward replacement.
Want a real number for your house? Ask first, then decide.
What about code parts, upkeep and the permit?
Code parts are where cheap bids and honest bids split. Upkeep is what keeps a tank alive in hard water.
| Item | National average range | Notes |
|---|---|---|
| Expansion tank, installed | $225–$625 | replace every 5–10 years |
| Tank flush | $100–$225 | yearly, more in hard water |
| Tankless descale | $110–$275 | at least yearly |
| City permit | ask the City | its schedule starts at $30 for projects under $5,000 |
- The permit: the City says a permit is required to add or replace a water heater. Its Common Permit Fees schedule has no water heater line, and work started before a permit can cost double, so confirm the fee with permit services at 913-895-6220.
- The code: the City uses the 2024 International Plumbing Code. The model sections on expansion control (607.3), the relief valve discharge (504.6) and the drain pan (504.7) are the usual places a quote adds a line.
- The license: a contractor needs an active Johnson County contractor license to receive a City building permit. Look one up on the county's contractor search (opens in a new tab).
What should a fair quote list?
A fair replacement price names every piece of the job.
- The new heater, with size, fuel and model
- The City permit, on its own line
- Hauling off the old tank
- New connectors, shutoffs and any gas or electrical connections
- Relief valve discharge pipe, an expansion tank and a drain pan where needed
- Start-up, with the thermostat set at the U.S. Consumer Product Safety Commission (CPSC)'s suggested 120°F
Softeners, recirculating pumps and leak sensors are optional and priced separately.
Why can bids for the same house vary?
Usually they aren't quoting the same job. Compare line by line, not bottom to bottom.
- What the base includes: one bid has the permit, expansion tank and haul-away; the other adds them later.
- The water: WaterOne's 2025 report (2024 data) averages 144 ppm, about 8.4 grains per gallon. Expect a flush plan and an anode check; on tankless, isolation valves.
- The fuel: the City lists both Atmos Energy and Kansas Gas Service, so confirm your gas company on your bill. No gas line means a new one before a gas heater is possible.
- The spot: a basement, closet or garage each changes the drain, pan and vent work.
- What was noticed: an undersized flue or gas line priced into one bid and missed in the other.
Are there rebates or financing?
Evergy's Kansas 2026 residential rebate chart does not list water heaters, and Kansas Gas Service's residential rebate page lists only a free water-conservation kit. The City lists Atmos Energy as a gas company too, so ask whichever company sends your gas bill, and do not count on a rebate until it confirms one.
If you want financing, ask the contractor whether any is offered, and get the terms on paper before you sign.
Ready for your own number? Call or text and get it before work begins.
Pricing questions
Are these the prices I will pay in Overland Park?
Not exactly. They are national averages, shown so you can tell whether a quote falls in the usual band. Your own price comes with the call and before any work starts.
Why is tankless so much more than a tank?
Because the conversion usually changes the gas line, the venting or the electrical circuit, not only the appliance. Nationally, tankless runs about $1,600 to $4,500 installed against about $1,000 to $3,400 for a standard tank.
Does every water heater need an expansion tank?
It is a code item wherever the plumbing is a closed system, under section 607.3 of the model plumbing code. Installed, one typically runs $225 to $625, and the City uses the 2024 International Plumbing Code.
How much is the water heater permit in Overland Park?
The City says a permit is required to add or replace a water heater, but its published schedule has no water heater line. It starts at $30 for projects valued under $5,000, so ask the City what applies.
When do I get a price for my own job?
Your price comes on the call back, before any work. A repair usually needs the fault confirmed first; for a swap, it helps to know the fuel, the tank size and where it sits.
Where these ranges come from
The ranges are the averaged low and high ends of several national cost guides: Angi/HomeAdvisor (opens in a new tab), Forbes Home (opens in a new tab) and HomeGuide (opens in a new tab). Angi and HomeAdvisor share figures, so they count once. Numbers are rounded to the nearest $25 and were checked in September 2026.
These are national averages, not an Overland Park price study. Local prices vary, and you'll hear your real price before work starts.
Last updated: